收藏本页 | 设为主页 | 随便看看 | 手机版
普通会员

上海秉奇阀门有限公司

阀门,水泵,机电设备,机械设备

产品分类
站内搜索
 
友情链接
您当前的位置:首页 » 供应产品 » 进口潜水排污泵(欧美进口品牌)
进口潜水排污泵(欧美进口品牌)
点击图片查看原图
产品: 浏览次数:250进口潜水排污泵(欧美进口品牌) 
品牌: 英国格林
单价: 面议
最小起订量: 1 台
供货总量: 100 台
发货期限: 自买家付款之日起 30 天内发货
有效期至: 长期有效
最后更新: 2020-12-12 11:14
  询价
详细信息
 

进口潜水排污泵

 
名称
进口潜水排污泵
压力
1.6MPa
型号
GR
口径
DN25-DN400
材质
铸铁、不锈钢
进口潜水排污泵
  • 质量:从铸件到产品,实行全过程质量监控,全方位检测,责任到人!
  • 价格:高效成本控制,自产自销,减少中间环节,让利于客户!
  • 交货:充足的库存,上海便捷物流,缩短交货期,严格按照合同期交货!
销售热线:021-51698378 
图文传真:021-69519069 
服务电话:13524269805

 

英国GRIMM格林进口潜水排污泵 UK GRIMM imp0rted submersible sewage pump

进口潜水排污泵.jpg

 

英国GRIMM格林进口潜水排污泵概述:
            进口潜水排污泵,是一种机泵一体的下泵潜水电泵,是在英国格林先进技术的基础上,结合国内水泵的使用特点而研制成功的新一代泵类产品。叶轮采用了先进的水力模型设计,并精密铸造而成,具有节能效果显著、防缠绕、无堵塞等特点。在排送固体颗粒和长纤维垃圾等方面具有独特效果。点叶片或双叶片叶轮结构,它类似于一截面大小相同的弯管。具有非常好的过流性。配以合理的蜗室,确保了该产品的高过流条件下的高效率。是一种理想的排污电泵。

英国GRIMM格林进口潜水排污泵特点:
1、采用独特的单叶片或双叶片叶轮结构,大大提高了污物通过能力,能有效的通过泵口径的5倍纤维物质与直径为泵口径约50%的固体颗粒。
2、机械密封采用采用新型硬质耐腐的碳化钨材料,同时将密封改进为双端面密封,使其长期处于油室内运行,可使泵安全连续运行8000小时以上。
3、整体结构紧凑、体积小、噪声低、节能效果显著,检修方便,无需建泵房,潜入水中即可工作,大大减少工程造价。
4、该泵密封油室内设置有高精度抗干扰漏水检测传感器,及定子绕组内预埋了热敏元件,对水泵电机自动保护。
5、可根据用户需要配备全自动安全保护控制柜,对泵的漏水、漏电、过载及超温等进行自动保护,提高了产品的安全性与可靠性。
6、可根据用户需要配备双导轨自动耦合安装系统,它给安装、维修带来更大方便,人可不必为此而进入污水坑。
8、能够在全扬程范围内使用,而保证电机不会过载。
9、有两种不同的安装方式,固定式自动耦合安装系统、移动式自由安装系统。

英国GRIMM格林进口潜水排污泵使用条件:

1、介质温度不超过40℃;介质密度≤1200kg/m3,PH值在5-9范围之内。
2、运行时不得低于最低液位,参见安装尺寸图中的“最低液位”(含自动冷却系统)。▽为为自动冷却系统时最低液位。
3、额定电压为380V,额定频率为50Hz。在额定电压和额定频率的偏差不大于5%时,电机才能正常运行。
4、通过泵的固体颗粒的最大直径不得大于泵体排出口直径的50%。

英国GRIMM格林进口潜水排污泵技术参数:    
流       量:5-1800m3/h
扬       程:7-60m
口       径:25-400mm
转       速:1450-2900r/min
功       率:0.75-75kw
电       压:380V
密       封:碳化钨,双端面密封
材       质:铸铁、不锈钢
连接方式:螺纹,法兰

英国GRIMM格林进口潜水排污泵主要用途:

          进口潜水排污泵主要用于市政工程、工业建筑、宾馆、医院、人防、矿山等行业,可用于排送带固体颗粒及各种唱纤维的污水、废水、雨水和城市生活用水。

UK GRIMM imp0rted submersible sewage pump summary:

 

           The imp0rt of non clogging submersible sewage pump referred to as imp0rt submersible sewage pump, a pump body pump submersible pump, is based on the introduction of British Green advanced technology, combined with the use of domestic water pump features a new generation of pumps and the successful development of. The impeller adopts the advanced hydraulic model design, and is made of precision casting. It has the characteristics of energy saving, remarkable effect, anti winding and no clogging. It has unique effects on solid particles and long fiber waste. The structure of a point or two blade impeller, similar to a bend of the same size. Has very good over-current. A reasonable volute chamber ensures high efficiency of the product under high flow conditions. The utility model is an ideal sewage discharge pump.

UK GRIMM imp0rted submersible sewage pump characteristic:

 

 

 

1.The use of unique single leaf or double vane impeller structure, greatly improved the passing capacity of dirt, can effectively pump through the caliber of 5 times the fiber material and diameter of the pump diameter of ab0ut 50% of solid particles.

2.Mechanical seal adopts new hard corrosion resistant tungsten carbide material, at the same time to improve the seal for double end sealing, so that it is long-term in the oil room running, can make the pump safe and continuous operation for more than 8000 hours.

3.The overall compact structure, small size, low noise, energy-saving effect is remarkable, easy maintenance, no construction of pump room, submerged into the water can work, greatly reducing the cost of construction.

4.The pump is equipped with a high precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat sensitive element to automatically protect the water pump motor.

5.According to user needs equipped with automatic safety control cabinet, the water leakage, leakage, overload and overtemperature, automatic protection, improve the product safety and reliability.

6.According to user needs with double rail automatic coupling installation system, it to installation and maintenance more convenient, people do not have to enter the sewage pit.

8.Can be used in the whole head range, and ensure that the motor will not overload.

9.There are two different installation methods, fixed automatic coupling installation system, mobile free installation system.

UK GRIMM imp0rted submersible sewage pump use condition:

1.The medium temperature is less than 40 ℃; medium density is less than 1200kg/m3, the pH value in the range of 5-9.

2.Operation shall not be lower than the minimum level, see the installation size figure of the "lowest level" status "(including automatic cooling system). As for the automatic cooling system at the lowest level.

3.Rated voltage is 380V, rated frequency is 50Hz. When the deviation of the rated voltage and the rated frequency is not more than 5%, the motor can work normally.

4.The maximum diameter of the solid particles through the pump shall not be greater than 50% of the diameter of the pump outlet.

UK GRIMM imp0rted submersible sewage pump technical parameters:

 

 

 

 

Flow rate: 5-1800m3/h

Lift: 7-60m

Caliber: 25-400mm

Speed: 1450-2900r/min

Power: 0.75-75kw

Voltage: 380V

Sealing: tungsten carbide, double face seal

Material: cast iron, stainless steel

Connection: thread, flange

UK GRIMM imp0rted submersible sewage pump main use:

 

 

 

           The imp0rt of submersible sewage pump is mainly used in municipal engineering, industrial buildings, hotels, hospitals, civil air defense, mining and other industries, can be used for discharge of solid particles and fibers sing sewage and waste water and rainwater and the city life water.

 

14979604996389173.png

进口潜水排污泵官网:http://www.021fmc.cn/aspcms/product/2018-5-8/1296.html 

14979604996389173.png

 

GRIMM中国:

    上海秉奇阀门有限公司GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与技术支持,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。             

关于GRIMM

          英国格林(GRIMM)国际有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行全球统一设计,统一标准,在水泵领域内处于领先地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与技术支持中心,同时向中国市场销售。

       英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。

       英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系:

GRIMM品质:

       GRIMM公司注重产品质量及使用寿命,全部采用先进制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。

GRIMM专业:

       掌握核心的流体控制技术,提供市场领先的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。

GRIMM服务:

       我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和技术支持,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

ab0ut GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, me-tallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

14979604996389173.png

英国格林总代理商:上海秉奇阀门有限公司,微信咨询:

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts:Huang Tianxiang

QQ:673088832

Mobile Phone:13524269805 (微信同号)

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District

询价单
0条  相关评论