收藏本页 | 设为主页 | 随便看看 | 手机版
普通会员

上海秉奇阀门有限公司

阀门,水泵,机电设备,机械设备

产品分类
站内搜索
 
友情链接
您当前的位置:首页 » 供应产品 » 进口自吸泵(欧美进口品牌)
进口自吸泵(欧美进口品牌)
点击图片查看原图
产品: 浏览次数:117进口自吸泵(欧美进口品牌) 
品牌: 英国格林
单价: 面议
最小起订量: 1 台
供货总量: 100 台
发货期限: 自买家付款之日起 30 天内发货
有效期至: 长期有效
最后更新: 2020-12-12 11:15
  询价
详细信息
 

进口自吸泵

 
名称
进口自吸泵
压力
1.6MPa
型号
GR
口径
DN25-DN300
材质
铸铁、不锈钢
进口自吸泵
  • 质量:从铸件到产品,实行全过程质量监控,全方位检测,责任到人!
  • 价格:高效成本控制,自产自销,减少中间环节,让利于客户!
  • 交货:充足的库存,上海便捷物流,缩短交货期,严格按照合同期交货!
销售热线:021-51698378 
图文传真:021-69519069 
服务电话:13524269805

 

英国GRIMM格林进口自吸泵 UK GRIMM imp0rted self-priming pump

进口自吸泵.gif

英国GRIMM格林进口自吸泵概述: 

          进口自吸泵是根据英国格林有关技术资料经吸收、消化、改进后研制而成的节能泵类产品。该泵属自吸式离心泵,它具有结构紧凑、操作方便、运行平稳、维护容易、效率高、寿命长、并有较强的自吸能力等优点。管路中不需安装底阀,工作前只需保留泵体内储有定量引液即可。因此简化了管路系统,又改善了劳动条件。

英国GRIMM格林进口自吸泵结构说明及工作原理: 

             进口自吸泵,主要由泵体、叶轮后盖、机械密封、泵轴、轴承座、进口阀、气液分离管、加水阀门,进、排接管等 组成。
          泵的工作原理,该泵均采用轴向回液的泵体。原理由吸入室、储液室、涡卷室、回液孔、气液分离室等组成。
          泵正常起动后,叶轮将吸入室所存的液体及吸入管路中的空气一起吸入,并在叶轮内得以完全混合,在离心力的作用下,液体夹带着气体向涡卷室外缘流动,在叶轮的外缘上形成有一定厚度的白色泡沫带及高速旋转液环。气液混合体通过扩散管进入气液分离室。此时,由于流速突然降低,较轻的气体从混合气液中被分离出来,气体通过泵体吐出口继续上升排出。脱气后的液体回到储液室,并由回流孔再次进入叶轮,与叶轮内部从吸入管路中吸入的气体再次混合,在高速旋转的叶轮作用下,又流向叶轮外缘。随着这个过程周而复始的进行下去,吸入管路中的空气不断减少,直到吸尽气体,完成自吸过程,泵便投入正常作业。

英国GRIMM格林进口自吸泵技术参数: 

流       量:3.2-600m3/h
扬       程:8-80m
口       径:进口直径:25-300mm
                  出口直径:25-250mm
吸       程:5-6.5m
自吸性能:1.3-2.5min/5m
转       速:1450r/min、2950r/min
功       率:0.75-132kw

 

 

英国GRIMM格林进口自吸泵应用范围: 
1、适用于城市环保、建筑、消防、化工、制药、染料、印染、酿造、电力、电镀、造纸、工矿冲洗、设备冷却等。
2、装上摇臂式喷头、又可将水冲到空中后,散成细小雨滴进行喷雾,是农场、苗圃、果园、茶园的良好机具。
3、适用于清水、海水及带有酸、碱度的化工介质液体和带有一般糊状的浆料(介质粘度≤100厘珀、含固量可达30%以下)。
4、可和任何型号、规格的压滤机配套使用,将浆料送给压滤机进行压滤的最理想配套泵种。

UK GRIMM imp0rted self-priming pump summary:

         imp0rted self-priming pump is based on the relevant technical data of the United Kingdom Green, absorbed, digested, improved, developed from energy-saving pump products. The pump is a self suction centrifugal pump. It has the advantages of compact structure, easy operation, stable operation, easy maintenance, high efficiency, long service life and strong self suction capacity. Do not need to install the valve in the pipeline, keep working just before the pump body fluid can be stored with quantitative cited. Therefore, the pipeline system is simplified and the working conditions are improved.

 

UK GRIMM imp0rted self-priming pump structure descri-ption and working principle:

 

           imp0rted self-priming pump, mainly by pump body, impeller rear cover, mechanical seal, pump shaft, bearing seat, inlet valve, gas-liquid separation pipe, water valve, intake, discharge pipe and so on.

        The working principle of the pump is that the pump adopts axial return liquid pump. The principle is composed of suction chamber, liquid storage room, scroll chamber, liquid return hole, gas-liquid separation chamber and so on.

        Pump normal starting, the impeller room will suck the liquid suction pipe and the air suction, and can be fully mixed in the impeller under the action of centrifugal force, the liquid entrainment from the gas chamber outer scroll flow, the formation of a certain thickness of the white foam and high-speed liquid ring in the impeller on the edge. The gas-liquid mixture passes through the diffusion tube into the gas-liquid separation chamber. At this point, as the flow rate suddenly decreases, the lighter gas is separated from the mixture gas, and the gas continues to rise and discharge through the pump body. After the degassing of liquid to the liquid storage chamber, and the reflux hole again into the gas and the impeller, impeller sucked from the suction pipe again mixed in high speed rotating impeller role, and flows to the outer edge of the impeller feels feels feels feels feels feels. As the process goes on and on, the air in the suction line continues to decrease until the gas is exhausted and the self-priming process is completed, and the pump is put into normal operation.

UK GRIMM imp0rted self-priming pump technical parameter:

 

 

Flow rate: 3.2-600m3/h

Lift: 8-80m

Caliber: Inlet diameter: 25-300mm

             Outlet diameter: 25-250mm

Range of suction: 5-6.5m

Self suction performance: 1.3-2.5min/5m

Speed: 1450r/min, 2950r/min

Power: 0.75-132kw

UK GRIMM imp0rted self-priming pump application range:

 

 

1. Suitable for urban environmental protection, building, fire, chemical, pharmaceutical, dye, printing and dyeing, brewing, electricity, electroplating, paper making, industrial and mining washing, equipment cooling, etc..

2. With rocker arm sprinkler, and water can be washed into the air, scattered into small raindrops spray, is a farm, nurseries, orchards, tea plantations good tools.

3. Application of chemical liquid in water, seawater and with acid, alkalinity and general mushy slurry (medium viscosity less than 100 per cent Perot, solid content is below 30%).

4. It can be used in conjunction with any filter press of any type or size, and will be the ideal type of pump for the press filter.

14979604996389173.png

进口自吸泵官网:http://www.021fmc.cn/aspcms/product/2018-5-9/1311.html 

14979604996389173.png

 

GRIMM中国:

    上海秉奇阀门有限公司GRIMM公司在中国的总代理,是中国拥有GRIMM代理权及销售权,主要为中国地区客户提供服务与技术支持,同时,秉奇人员也积极参与总部技术培训学习,并不断掌握产品原理、实际运作、工程技术做为基石,完善对中国地区客户需求。             

关于GRIMM

          英国格林(GRIMM)国际有限公司是亚太地区流体控制领域的主要生产和供应商之一,公司总部位于克莱福德,拥有一支有经验的研发队伍,实行全球统一设计,统一标准,在水泵领域内处于领先地位。在许多个国家均有生产水泵基地,中国由上海秉奇阀门负责中国市场各项业务与技术支持中心,同时向中国市场销售。

       英国格林(GRIMM)产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域,以及人们日常生活中。

       英国格林(GRIMM)主要产品有:管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。

服务体系:

GRIMM品质:

       GRIMM公司注重产品质量及使用寿命,全部采用先进制造技术和生产设备,并坚持不懈研发新产品,为确保不间断的全过程质量控制,在生产过程中采用(SPC)过程控制和(TQM)全面质量管理;GRIMM的严格规范实现了不让品质拖节,有效保障产品每个细节达到的性能指标。

GRIMM专业:

       掌握核心的流体控制技术,提供市场领先的产品、服务和解决方案,帮助用户提高效率,带来至关重要的基础设施。

GRIMM服务:

       我们与用户紧密合作,支持一系列系统使用技术和文件报告,提供售前、售中、售后服务和技术支持,有了您的信任与支持,我们将更完善、更高效提供水泵流体技术方案。

GRIMM china:

         Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.

ab0ut GRIMM:

         Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.

       Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, me-tallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.

       Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.

Service system:

GRIMM quality:

         GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.

GRIMM major:

          Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.

GRIMM service:

          We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.

14979604996389173.png

英国格林总代理商:上海秉奇阀门有限公司,微信咨询:

Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:

 

Welcome new and old customers call negotiate!

Contacts:Huang Tianxiang

QQ:673088832

Mobile Phone:13524269805 (微信同号)

Company Phone:021-51698378

Add:Lane 51, dragon road, Shanghai, Xuhui District

询价单
0条  相关评论